If you export electrical appliances to Japan for the first time

  • Home
  • If you export electrical appliances to Japan for the first time

If you export electrical appliances to Japan for the first time

JET provides a number of services to support foreign businesses in exporting electrical products to Japan.

Support for compliance with Japanese lagel ragulations

Electrical products may need to apply to the Electrical Appliance and Material Safety Law or Consumer Products Safety Law, or receive certification from the Pharmaceutical Affairs Law or Industrial Standardization Law.

It is necessary to determine in advance whether the products you wish to manufacture or export apply to laws, or if it is necessary to receive legal certification in distribution processes.

JET provides the following services:

1)PSE Mandatory Third-Party Conformity Assessment for "Specified electrical appliances and materials" under Electrical Appliance and Material Safety Law
PSE

JET carries out a mandatory third party conformity assessment on Specified Electrical Appliances and Materials under the Electrical Appliance and Material Safety Law.
See here for details:

2) PSE Mandatory Assessment of Conformity to the technical requirements under Electrical Appliance and Material Safety Law
PSE

JET carries out a commissioned test to verify if the product conforms to the technical requirements of the Electrical Appliance and Material Safety Law.
See here for details:

3)PSC Mandatory Third-Party Conformity Assessment for "Designated specified products" under Consumer Products Safety Law
PSC

From among Designated Specified Products under the Consumer Products Safety Law, JET carries out a conformity assessment on electric hot water circulators for bathtubs.
See here for details:

4)Certification of Controlled medical devices under Pharmaceutical Affairs Law
Controlled medical devices

JET obtains production and distribution certification for “specially controlled medical devices” under the Pharmaceutical AffairsLaw.
See here for details:

5)JIS Mark Certification
JIS

JET, as a registered certification office for the Industrial Standardization Law, carries out JIS Mark certification.
See here for details:

6)Certification of Water Supply Apparatus under Waterworks Law
Water Supply Apparatus

Complying with the performance standards under Water Works Law required by local government agencies, etc., JET provides certification for water supply apparatus.
See here for details:

Product safety verification

Separate from legal regulations, there is a stronger demand for verification of product safety. JET provides the following various services to verify the safety of electrical products which you are considering export into Japan. Additionally, we accept your inquiries as to whether we can carry out services not listed here.

1)Certification Service

JET evaluates product safety (including aspects of performance), evaluates production facility quality control, and provides certification as a third party. Certified product may display the certification mark on it based on the contract with JET.

1.S-JET Certification
S-JET

JET, acting as an independent party, verifies the safety of electrical products and certifies them.
See here for details:

2. Certification of Circuit Breakers for residences
HB

For residual current operated circuit breakers and molded case circuit breakers, JET provides certification after carrying out the mandatory assessment under Electrical Appliance and Material Safety Law regulations and additionally even stricter own assessment.
See here for details:

3.CMJ Registration
CMJ

By examining and certifying the components and materials used in electrical devices in advance, certification testing for electrical products can be rationally carried out.
See here for details:

4.Certification of Components and Materials
Components and Materials

In order to rationalize the JET certification testing process, this service can certify components and materials in advance.
See here for details:

5.Certification of Photovoltaic Modules
JETPVm

JET evaluates the safety and performance of Photovoltaic modules, and provides certification.
See here for details:

6.Low-voltage grid connected inverters (Power conditioners)Certification
Low-voltage grid connected inverters (Power conditioners)

JET evaluates the safety and performance of Low-voltage grid connected inverters (Power conditioners) and other such devices used in solar batteries, gas engine cogeneration units, and fuel cell systems, providing certification.
See here for details:

2)Contract Testing

JET acts as a third party to carry out a variety of tests based on various regulations and standards such as conformity to the technical requirements under the Electrical Appliance and Material Safety Law, providing the testing results certificate.

Our primary services are as follows:
JET also accepts requests for custom-made tests using the JET facilities. See here for details:

1.PSE Mandatory Assessment of Conformity to the technical requirements under Electrical Appliance and Material Safety Law

JET carries out testing to verify that products conform to the technical requirements under the Electrical Appliance and Material Safety Law.
See here for details:

2.EMC Testing Services

JET utilizes 3m and 10m anechoic chambers carry out EMC testing based on international and Japanese standards.
See here for details:

3.Evaluation of Electrical Insulating materials

JET carries out testing such as tracking-resistance and glow-wire testing on insulation materials.
See here for details:

4.Calibration of secondary reference solar cells and Measurement of PV modules

JET carries out calibration of Secondary reference solar cell and measures Photovoltaic modules traceable to the national standard.
See here for details:

5.Measurement of cooling/heating capacity of Air Conditioners

JET utilizes a thermostatic chamber corresponding to Air Enthalpy test method to measure the cooling and heating capacity of air conditioners.
See here for details:

6.Measurement of cooling/heating capacity of Air Conditioners

JET uses testing equipment corresponding to JIS C0920 (IEC60529) to verify ingress protection capability against dust and water.
See here for details:

7.Photometry of various Light Sources including LED

JET uses 1m and 2m integrating spheres to carry out photometry of various light sources including LED.
See here for details:

8.Testing on conformity of Medical Devices to the Certification Standards (JIS)

JET carries out testing on conformity of medical devices to certification standards necessary for medical devices to receive third party certification.
See here for details:

Other Services

JET also offers the following other services

1)Cooperation With Foreign Certification Agencies

JET provides services to enable foreign businesses to obtain Japanese certification based on cooperation with foreign certification agencies. We also issue and accept CB test certificates and reports, in participation with the IECEE-CB system.
See here for details:

2)Assessment and Registration of ISO and other Management Systems

JET carries out assessment and registration of ISO9001, ISO14001, and other various management systems.
See here for details:

3)Technical Advice Service

As a general support service, JET accepts advice services in relation to the Electrical Appliance and Material Safety Act, as well as advice services about model classification or business notification etc.
See here for details:

Last Update:2011.09.01